YJBA80-30L
1)Fully automatic energy saving blow molding machine, with accumulator die head capacity 5L;
2)Suitable to produce volume up to 30L, specially water tank, jerrycan, auto parts….
3)Unique 3 cylinder+2 bar clamping system, stable structure, balanced force distribution,longer working period;
4)Adobe good quality linear guide rail, faster moving speed and lower energy cost,higher output.
Main Parameters | UNIT | YJBA80-30L |
Max. Product Volume | L | 30 |
Suitable Raw Material | – | PE,PP |
Dry Cycle | PCS/H | 650 |
Screw Diameter | mm | 80 |
Screw L/D Ratio | L/D | 24 |
Screw Drive Power | Kw | 30 |
Screw Heating Power | Kw | 16 |
Screw Heating Zone | Zone | 4 |
HDPE Output | Kg/h | 100 |
Oil Pump Power | Kw | 15 |
Clamping Force | Kn | 210 |
Mold Template Size | mm | 400-1050 |
Mold Open & Close Stroke | W×H(mm) | 760-660 |
Max.Mold Size | W×H(mm) | 600×700 |
Die Head Type | Accumulator die head | |
Accumulator Capacity | L | 5 |
Max.Die Diameter | mm | 260 |
Die Head Heating Power | Kw | 11.9 |
Die Head Heating Zone | Zone | 4 |
Blowing Pressure | Mpa | 0.6 |
Air Consumption | M3/min | 0.8 |
Cooling Water Pressure | Mpa | 0.3 |
Water Consumption | L/min | 60 |
Machine dimension | L×W×H(M) | 4.5×2.4×3.5 |
Machine | Ton | 11.5 |
PLASTICZING SYSTEM | |
Screw | Adopt high-performance nitriding steel screw to ensure the material be plasticized evenly and completely; Good plasticizing capability, high output; Transducer adjusts speed and collects temperature-control signals to prevent the screw from cold starting. |
Speed Reducer | Hard-teeth, low noise & wear-resistant speed reducer |
Machine Barrel Screw | 38CrMoALA high quality nitrogen steel |
Heating Zone | 3 Zone Casting, aluminum heater |
Extrusion Motor | Three phase asynchronous motor (380V、50HZ) |
Cooling fan | 3 zones |
EXTRUCTION SYSTEM | |
Die Head | 38CrMoALA high quality nitrogen steel |
Heating Zone | 3 zone, heat coil of stainless steel |
Die Heat Huff | Pressure and capacity can be adjusted |
Preform Adjustment | Automatic |
Heat insulation | By heat insulating board between accumulator and hydraulic cylinder |
OPENING AND CLAMPING SYSTEM | |
Clamping structure | Three tie bar and three cylinder, enough power |
Molds moving structure | Two linear rolling guide way, high precision |
Mold Platen (W×H) | 320×380mm, suitable to install different sizes of molds |
ELECTRIC CONTROL SYSTEM | |
Programmable Logic Controller | Japanese MITSUBISHI PLC, famous brand Stable and perfect performance, high precision |
Touch Screen | Colorful touch screen, autoalarm, self-diagnose the system |
Temperature Control | Self-regulation |
Temperature Module | MITSUBISHI automatic temperature module, digital |
Action control | Japanese MITSUBISHI, programmable |
Protection Function | Automatic alert and breakdown feedback, double protection of mechanical apparatus |
HYDRAULIC SYSTEM | |
Function | Proportion pressure controller, changing direction quickly and softly |
Oil pump motor | three phase asynchronism motor (380 V, 50 HZ) |
Hydraulic pump | Vane pump |
Hydraulic valve | Imported hydraulic components—YUKEN |
Pipes | Bilayer high pressure blast pipes |
Cooling Mode | Water cooler and oil cooler separately |
PNEUMATIC SYSTEM | |
Component | Imported famous brand pneumatic parts |
Valve | TAIWAI AIRTAC |
COOLING SYSTEM | |
Three cooling ways | Mold、barrel、oil box adopt independent cooling waterway |
Cooling Medium | water |
Colling water consumption | Underground water or provided by Water chiller |
Water Pressure | 0.2-0.6 (Mpa) |
Reach Us
A1, Zone B, Sugaoxin Energy Conservation & Environment Innovation Park, Tangqiao Town, Zhangjiagang, Jiangsu Province, 215600, China.
0086-512-58342732
+0086-15995981021
Fill out my online form.